The best way to solve the problem of PVC threading pipe manual bending

PVC threading pipe artificial bending pipe construction is a big problem. Because PVC pipe is too much and has to be erected, it is difficult to ensure that the angle and effect of the bending are consistent, and even the bending fails. The bending becomes the master. A test must have a wealth of construction experience and arm strength and so on.

PVC elbow pipe artificial elbow mainly has four kinds of bridge bends, upper wall bends, 135 degrees T-bend, and 90 degree big bends. Different environments will have different problems with different wiring processes. If these problems are solved What? Our company's R&D personnel have undergone many construction tests and summaries, and have made detailed analysis and solutions on how to solve the problems caused by manual bending, and hope to help in circuit transformation.

1. Pvc fitting bridge bend: suitable for PVC line pipe crossing

Advantages: Solve the pipeline damage caused by traditional artificial spring bending pipe, reduce the disadvantages of pvc threading pipe service life, save materials and improve construction progress

Solution: Use bridge bend, 360 degree free rotation and angle adjustment design, should be free to reduce friction and wiring space between PVC threading tubes.

2. Upper wall bend: suitable for PVC threading pipe upper wall wiring

Advantages: Solve the pipeline damage caused by traditional artificial spring bending pipe, reduce the disadvantages of pvc threading pipe service life, save materials and improve construction progress

Solution: Use the upper wall bend, the arc is small, good pre-buried, easy to use, can reduce the difficulty of wiring on the upper wall and improve the construction progress.

3. 135 degree T-bend: suitable for PVC threading pipe T-type wiring

Advantages: Solve the pipeline damage caused by the traditional artificial spring elbow, reduce the disadvantages of the service life of the PVC threaded pipeline, save the materials and improve the construction progress.

Solution: Using the material 135 degree T-turn process, the PVC threading pipe is arranged neatly and orderly, standardized and unified, saving time and effort.

4. 90 degree elbow: suitable for PVC threading pipe 90 degree turn

Advantages: Solve the pipeline damage caused by traditional artificial spring elbow, reduce the disadvantages of PVC threading pipe service life, save materials and improve construction progress

Solution: Use a 90-degree elbow with large arc, no dead angle, easy to pull, and the wires in the PVC threading pipe are unimpeded.